Access 2 Prober HighlightsSingle head flying prober tester in a benchtop sized platform
|Access 2 Prober Specification||Access 2 Prober|
|Number of Test Heads||1|
|Maximum Board Under Test Size||22" x 23" (56cm x 58cm)|
|Maximum Probing Area||18.2" x 22.4" (46.2cm x 56.9cm)|
|Maximum Board Component Height||4" (10cm)|
|Dimensions||36" W x 15.7" H x 29" D (91.44cm W x 39.88cm H x 73.66cm D)|
|Accuracy and Resolution||0.0007874" (±20 microns) at 0.0003937" (10 microns) minimum|
|Accessory Name||Accessory Part Number|
|Huntron Workstation CD||F-06-5228|
|Manual on CD||F-06-5217|
|4 Common leads||F-98-0043|
|Common Lead with Ferrite Bead (EMI reduction)||F-98-0227|
|National Instruments Vision Runtime License||F-98-0422|
|2 Crossbar Assemblies - 22"||F-98-0119|
|2 Slide Bar Extensions||F-98-0132|
|2 Slide Bar Assembly||F-98-0109|
|PCA Support Kit||F-98-0167|
|4 Board Spacers (4 slot)||F-98-0292|
|3/32 Allen Wrench for Stop Blocks||F-98-0228|
|2 BNC Cables||F-98-0479|
|Probe Kit (includes 50mil Probe Holder)||F-98-0126|
|Access Prober Specification||Access||Access 2||Access DH|
|Number of Test Heads||1||1||2|
|Maximum Board Under Test Size||19.4" x 14" (49.3cm x 35.6cm)||22" x 23" (56cm x 58cm)||12" x 19" (30.5cm x 48.3cm)|
|Maximum Probing Area||15.3" x 12.9 " (38.9cm x 33.8cm)||18.2" x 22.4" (46.2cm x 56.9cm)||12" x 19" (30.5cm x 48.3cm)|
|Maximum Board Component Height||2.375" (6cm)||4" (10cm)||4.8" (12.2cm)|
|Dimensions||26.5" W x 13" H x 24.5" D (67.31cm W x 33.02cm H x 62.3cm D)||36" W x 15.7" H x 29" D (91.44cm W x 39.88cm H x 73.66cm D)||39" W x 61" H x 53" D (99.1cm W x 154.9cm H x 134.5cm D)|
|Accuracy and Resolution||0.0007874" (±20 microns) at 0.0003937" (10 microns) minimum||0.0007874" (±20 microns) at 0.0003937" (10 microns) minimum||0.0007874" (±20 microns) for Top Slot (6" above plate) at 0.00002" (0.4 microns)|
Q: What are the primary differences between the Access and the Access 2?
A: The main difference is size. The Access Prober is sized for small to medium dimension PCBs while the Access 2 Prober can handle larger PCBs. The Access 2 has additional vertical space to handle taller features on a PCB. See the Compare Prober Specifications chart for the actual dimensions.
Q: What types of test hardware can be connected to an Access 2 Prober?
A: The Huntron Workstation software supports Huntron Trackers (Tracker Model 30 and Tracker 3200S) and selected conventional test instruments (see the Workstation Software page for a list). Other test instrumentation can be connected to an Access Prober and controlled using Huntron Remote Control or custom applications developed using the Hardware SDK.
Q: How fast is the Access 2 Prober?
A: The probing speed depends on how the Prober is being used. If it is being used to take measurements, the speed in affected by how long it takes to capture the measurement. In general, you will be able to probe roughly one point per second.
Q: How accurate is the Access 2 Prober?
A: Huntron Access Probers are very accurate. The minimum step resolution is 10 microns with an accuracy of +/- 20 microns. This is more than accurate enough to probe very small lead spaced devices such as the 0.4mm surface mounted ICs.
Q: Can I use CAD data to develop a test routine?
A: Yes. Optional software is available to assist you in using your CAD data to create tests in Huntron Workstation. You can find more details by visiting the Workstation Software page.